Look under the face cushion to find your PICO 4 Ultra Enterprise serial number. This is the code that identifies your individual headset. You can find it even when the headset will not turn on.
Find the label under the face cushion
Work in a well-lit place indoors. A phone camera can help you read small print.
1. Hold the headset with the two lenses facing you. The face cushion is the soft pad around the lenses that rests against your face.
2. Gently pull the face cushion away from the headset by its edges. Support the headset with your other hand. Remove the cushion as one piece; do not peel the soft padding off its backing.
3. Look at the area uncovered by the cushion. Find the serial-number label and its QR code, the small square pattern of black and white blocks.

The blue area shows where to inspect after removing the face cushion. The label example is illustrative; its exact position and design are not reproduced.
4. Save the complete serial number. Copy every letter and number, or take a clear close-up photo of the label. A field marked SN or S/N means serial number.
To scan the QR code instead: Open your phone’s Camera app and point it at the code. Keep the whole square in view. If a result appears, tap it and save the serial number shown. If nothing appears, photograph the label instead.
5. Refit the cushion by lining it up with the headset and gently pressing around its edges until it is secure.
If the cushion will not come away easily: Stop pulling. Do not use a screwdriver or force a damaged part.
Help with step 2: VR Expert’s face-cushion removal and fitting guide
If the label is missing or hard to read
Small or blurry text: Take another photo in better light, then zoom in. If a character is unclear, send the photo to support instead of guessing.
You still have the original box: Check the label on its side or bottom, near the barcode. Look for SN or S/N. Use this only if you know the box belongs to this headset, and tell support the number came from the box.
Optional: check settings if the headset still works
Skip this section if the headset will not turn on or you cannot use its screen.
1. Open Settings from the headset’s main menu.
2. Select About. You may need to scroll down the settings menu to see it.
3. Find Device Serial Number and write down the complete code. Scroll down the About page if it is not visible.
Still cannot find it? Contact VR Expert support. Send a photo of the label or the area where it should be, the model name (PICO 4 Ultra Enterprise), and your order number if available. Say that the serial number is unreadable or missing.


Comments