In this article you will learn how to use the My Camera application on the RealWear Navigator 500.
What is needed:
- RealWear Navigator 500
How to use the My Camera application on the RealWear Navigator 500:
- Zoom level: You can change the zoom level of the camera to a specific value from 1 to 5 by using the voice command: “Zoom level 1-5’’. For example: to set the zoom level to 4, say “Zoom level 4’’.
- Take a Photo: Take a photo by using the voice command: “Take Photo’’. The photo will be saved as a JPEG file in the “My Photos’’ folder. The filename of the photo will be displayed on the screen for reference.
- Video Recording: Start recording a video by using the voice command “Start Recording’’. To stop recording, use the voice command “Stop recording’’. The video will be saved as an MPEG4 file in the “My Media’’ folder. The filename of the video will be displayed on the screen for reference.
- Focus: The camera can be set either in auto focus or manual focus mode. By default, the camera is set to auto focus mode. To change to manual focus, use the voice command: “Manual focus’’. You are then able to select a part of the screen to be focussed. To change back to the auto focus mode, use the voice command “Auto focus’’.
- Flashlight: To turn the flashlight On, use the voice command: “Flash ON’’. To turn the flashlight Off, use the voice command “Flash Off’’.
You should now know how to use the camera on the RealWear Navigator 500.
Comments