In this article, you will learn how to screencast your Pico Neo 3 to an external screen.
What is needed:
- Pico Neo 3 headset
- TV, projector, or monitor that supports Miracast (most smart TVs come standard with Miracast), if your device does not support Miracast you can buy a Miracast dongle.
- Internet connection
Important*If you want to cast a monocular screen, you need to enable ‘Single-eyed Display’. Open your settings, select More>Connected Devices>Single-eyed Display.
Instructions for screencasting with a built-in Miracast receiver.
Important* If you can not connect with your TV immediately, open the application on your TV as well for the Miracast to work.
- Make sure both your Pico headset and your Miracast device are connected to the same WiFi network.
- Switch on your TV/receiver and open the Miracast application
- Put on your Pico Neo 3 headset, and double click the Pico button (located on the right side of the headset). This will take you to a quick menu.
- Select ‘Screencast’ from the quick menu.
- When in the screencast menu, make sure that ‘Enable wireless display’ is enabled.
- You can do this by clicking on the 3 dots at the top right corner from the screencast menu.
- Select the device you want to cast to.
- When you have selected the device, you will receive a notification on that device.
- Accept this notification
Your Pico Neo 3 screen should now be duplicated to this device.
Instructions for screencasting with a Miracast dongle.
- Make sure your Miracast dongle is connected to your TV
- Select the HDMI channel the dongle is connected to on your TV
- Connect the Pico Neo 3 to the WiFi signal of the Miracast dongle.
- Put on your Pico Neo 3 headset, and double click the Pico button (located on the right side of the headset). This will take you to a quick menu.
- Select ‘Screencast’ from the quick menu.
- When in the screencast menu, make sure that ‘Enable wireless display’ is enabled.
- you can do this by clicking on the 3 dots at the top right corner from the screencast menu.
- Select the device you want to cast to.
Your Pico Neo 3 screen should now be duplicated to this device.
To stop casting
- Double click on the Pico button on the right side of the headset to open the ‘quick menu’.
- Open the Screencasting menu by selecting ‘Screencast’.
- Click on the 3 dots in the top right corner of the menu.
- You can disable ‘Enable wireless display’ here
Your screencasting should now be stopped.
Comments