This article will explain how to screencast the RealWear Navigator 500, either over USB or wirelessly over WiFi.
What is needed:
- RealWear Navigator 500
- Computer with RealWear Explorer installed
- USB-C cable
How to screencast the RealWear Navigator 500 over USB:
- Open RealWear Explorer on your computer
- Connect the RealWear Navigator 500 to the computer using a USB-C cable
- Screencasting should work automatically
How to screencast the RealWear Navigator 500 over WiFi:
- Make sure the RealWear Navigator 500 and your computer are connected to the same WiFi-network
- Connect the RealWear Navigator 500 to RealWear Explorer using a USB cable and begin streaming over USB
- When streaming begins automatically, select the ‘’Disconnect from RealWear Cast’’ button
- Select the ‘’Connect using RealWear Cast’’ button, which now will connect wirelessly
- Follow the instructions on the wizard to pair the RealWear Navigator 500 with RealWear Explorer
- Accept any prompts that will pop up on the RealWear Navigator 500 to allow RealWear Explorer to capture the screen
- It is now safe to unplug the RealWear Navigator 500 from the USB cable and screencast wirelessly.
You should now know how to screencast the RealWear Navigator 500.
Comments