In this article you will learn how to connect the Vuzix Blade 2 to your computer
What is needed:
- Vuzix Blade 2
- PC
- Micro USB cable
How to connect your Vuzix Blade 2 to your computer.
- Turn on your PC.
- Plug the USB cable into the PC.
- Plug the other end of the cable into your Vuzix Blade 2.
- On your PC click on the Windows logo on the bottom left of your screen.
- Type ‘file explorer’ and press enter. This will open the File explorer menu.
- In the File explorer menu go to ‘This PC.’
- Your Vuzix Blade 2 should show up here.
7.1 If the Vuzix Blade 2 did not show up here follow the following steps.
7.2 Unplug the Vuzix Blade 2 from the USB cable.
7.3 Turn on the Vuzix Blade 2 and put it on.
7.4 Go to settings on your Vuzix Blade 2, if you do not know how to open settings read our article about it.
7.5 In settings go to Device > USB Mode.
7.6 Change the USB Mode settings to MTP (Media Transfer Protocol). This will bring you back to the Device Menu screen.
7.7 Take off your Vuzix Blade 2 and plug the USB cable back in.
7.8 Your Vuzix Blade 2 should now show up in the File explorer menu. Your Vuzix Blade 2 should now be connected to your computer.
Comments