Getting started with the Moziware Cimo

In this article we will show you how to get started with the Moziware Cimo.

In the box

• Moziware Cimo 
• USB-C to USB cable

Before you start

Handle the headset carefully and gently, as several parts are very fragile.

How to wear the Moziware Cimo

The Moziware Cimo can be worn on the left or right side of your head. It is recommended to wear the Moziware Cimo on the side with your dominant eye.

How to determine your dominant eye

1. Locate a distant object you can focus on. It could be a picture on the wall or any distinct object in the distance.
2. Extend both of your arms fully in front of you and make a triangle with your thumbs and index fingers.
3.  Keep both of your eyes open, and with both hands extended, align the triangle with the distant object you are focusing on. Ensure that the object is framed in the middle of the triangle.
4. Now, close your left eye while keeping your right eye open, still maintaining the triangle’s alignment with the distant object.
5. Observe what happens to the object inside the frame of the triangle. Does it remain in the same position, or does it move out of the triangle?
6. Open your right eye and close your left eye. Again observe if the object moves out of the triangle.
7. The eye with which you still see the object in the center of the triangle is your dominant eye.

You now know what your dominant eye is.

How to put on the Moziware Cimo

1. Attach the Moziware Cimo to the Moziware workband (or a different accessory to wear the Moziware Cimo). Keep in mind to install the headset on the side of your dominant eye.
2. Place the workband / accessory on your head. Make sure the headset is aligned horizontally and is located over your ear in the area of your temples.
3. Move the arm with the display module to the front and unfold the display module.
4. Reposition the display by moving the boom arm and the ball-joint of the display module, ensuring that it is located in front of your dominant eye and slightly below it. This will result in the display being positioned approximately at the center of your face.
5. You found the right position if you can see all four corners of the display.

The Moziware Cimo is now in the correct position.

How to select the language of the Moziware Cimo with voice commands

1. Go to the Homepage by saying “Homepage”.
2. Open the settings by saying “Device Settings”.
3. Say “Language Selector” to display all languages. 
4. Now use the left/right button on the headset to switch between languages. A list of every language can be found here.
5. To select a language, stay on the desired language for more than 3 seconds. A countdown will indicate when the language will be switched.

The language of the Moziware Cimo is now changed.

How to select the language of the Moziware Cimo without voice commands

1. Turn on the headset.
2. Press and hold the left button for 2 seconds.
3. All languages will be displayed. 
4. Now use the left/right button on the headset to switch between languages. 
5. To select a language, stay on the desired language for more than 3 seconds. A countdown will indicate when the language will be switched.

The language of the Moziware Cimo is now changed without using Voice Commands.

Speech commands to navigate the Moziware Cimo

“Global commands”: Shows a list of voice commands 

“Home Page”: Access the Home screen

“Device Settings”: Access the Device Settings

“Next Page”: Access the next page

“Go Back”: Go back to the previous page

“Show Numbertags”: Shows the number tags of each item

“Open Item […]”: Opens Item […]

“Scroll up/down”: Scroll up/down on the screen

“Mute Microphone”: Mutes the microphone. To reactivate the microphone press the left or right button of the headset

With these voice commands you will be able to navigate the Moziware Cimo.

How to connect the Moziware Cimo to Wi-Fi

1. Go to the Homepage by saying “Homepage”.
2. Open the settings by saying “Device Settings”.
3. If the Wi-Fi connection is turned off, say “Wireless connection” to turn it on.
4. To access the Wi-Fi settings say “Wireless Settings”.
5. You will see all the possible Wi-Fi connections displayed.
6. Say the name of the desired Wi-Fi connection or say “Item […]” followed by the number of the desired Wi-Fi connection.
7. The keyboard will appear. 
8. Enter the password of the Wi-Fi connection. A guide on how to use the keyboard can be found here.
9. Say “Confirm”.

The Moziware Cimo is now connected to Wi-Fi.